0538ic03 BA5/6 PH, Glasdach: (Glass roof): FB1
BA5/6 PH, Glasdach
| Certified since | 18 Luglio 2013 |
| Climate zone | Freddo, temperato |
| Tipo | Glass roof |
| Sub type | |
| Efficiency class | phA |
| Material | Aluminium |
| UW | 0,82 W/(m2K) |
| Open type |
Descrizione
Aluminium construction with covering- and pressure-strip from aluminium. PE-foam and styrodur insulator in the glazing rebate. Screws themallly seperated by ABS. Losses by screws and glass carrier were determined by 3D-thermal flux analysis (PHI). Used Pane: 52 mm (6/16/6/16/8), intersection of the Glass: 16 mm. Used spacer: Swisspacer V. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.
| Nome | Frame width | U-value | Ψ-value | Frsi-value |
|---|---|---|---|---|
| Mullion Fixed | 60 mm | 0,98 W/(m²K) | 0,040 W/(mK) | 0,810 |
| Transom fixed | 60 mm | 0,99 W/(m²K) | 0,040 W/(mK) | 0,810 |
| Bottom Fixed | 60 mm | 0,99 W/(m²K) | 0,039 W/(mK) | 0,810 |
| Top fixed | 60 mm | 0,99 W/(m²K) | 0,039 W/(mK) | 0,810 |
| Lateral fixed | 60 mm | 0,98 W/(m²K) | 0,040 W/(mK) | 0,810 |
