Newly certified 制造商 Certification criteria

No element found

BA5/6 PH, Glasdach

0Products in the comparision list
Compare all

BA5/6 PH, Glasdach

Certified since 2013年7月18日
气候区 冷,温度
类型 玻璃顶
能效阶级 phA
UW 0.82 W/(m2K)


Aluminium construction with covering- and pressure-strip from aluminium. PE-foam and styrodur insulator in the glazing rebate. Screws themallly seperated by ABS. Losses by screws and glass carrier were determined by 3D-thermal flux analysis (PHI). Used Pane: 52 mm (6/16/6/16/8), intersection of the Glass: 16 mm. Used spacer: Swisspacer V. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.

名称 边宽高度 U值 Ψ-Value Frsi-Value
立柱固定 60 mm 0.98 W/(m²K) 0.040 W/(mK) 0.810
横梁固定 60 mm 0.99 W/(m²K) 0.040 W/(mK) 0.810
下横框固定 60 mm 0.99 W/(m²K) 0.039 W/(mK) 0.810
上横框固定 60 mm 0.99 W/(m²K) 0.039 W/(mK) 0.810
侧柱 60 mm 0.98 W/(m²K) 0.040 W/(mK) 0.810


Ådalsvej 99
2970 Hørsholm


Please select preferred window layout