Identyfikator komponentu: | 0726cw03 |
---|---|
Producent: | Aluprof S.A. |
Kategoria: | System ścian osłonowych |
Materiał: | Aluminium |
UW: | 0,80 W/(m2 K) |
Klasa efektywności: | phA+ |
Odstęp: | SWISSPACER Ultimate |
Strefy klimatyczne: | Cool, temperate |
Opis: | Mullion and transom facade of aluminium. Aluminium cover- and pressure- strip. PE foam insulator inside of the rebate (0.035 W/(mK). Used Pane: 54 mm (6/18/6/18/6), intersection of the Glass: 14 mm. The screw-losses were carried out by 3D-thermal flux simulation (PHI), for the glass-carrier losses, the default-values according to the certification criteria were taken into account. Used spacer: ULTIMATE Swisspacer with silicone secondary sealing. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing. |
Certified since: | 16 października 2014 |
Cięcie w ramie | Szerokość ramy bf mm |
Frame U-value Uf W/(m2 K) |
Glass edge Ψ-value Ψg W/(m K) |
Współczynnik temperatury fRsi = 0.25 m2K/W |
---|---|---|---|---|
Szpros stały | 50 | 0,97 | 0,032 | 0,83 |
Stała pawęż | 50 | 0,94 | 0,032 | 0,83 |
Dół stała | 50 | 0,94 | 0,032 | 0,83 |
Górna Ustalone | 50 | 0,94 | 0,032 | 0,83 |
Boczna stała | 50 | 0,97 | 0,032 | 0,83 |