0161cw03 THERM+ 50 A-V: (System ścian osłonowych): FB1
THERM+ 50 A-V
| Certified since | 20 kwietnia 2010 |
| Strefa klimatyczna | Cool, temperate |
| Typ | System ścian osłonowych |
| Sub type | |
| Klasa efektywności | phA |
| Materiał | Aluminium |
| UW | 0,80 W/(m2K) |
| Typ otwarty |
Opis
Aluminium construction, Aluminium covering- and pressure-strip. PE-foam insulator in the glazing rebate, inside covered by reflecting Aluminium foil (ε = 0,05). Plastic glass-carier on stainless steel screws. The losses by the screws werde determined by measurement (ift), the losses caused by the glass carrier by 3D-simulation (PHI). Used Pane: 48 mm (6/16/4/16/6), intersection of the Glass: 13 mm. Used spacer: Swisspacer V. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.
| Nazwa | Szerokość ramy | Współczynnik U | Ψ-value | Frsi-value |
|---|---|---|---|---|
| Szpros stały | 50 mm | 0,87 W/(m²K) | 0,038 W/(mK) | 0,820 |
| Stała pawęż | 50 mm | 0,86 W/(m²K) | 0,038 W/(mK) | 0,820 |
| Dół stała | 50 mm | 0,86 W/(m²K) | 0,038 W/(mK) | 0,820 |
| Górna Ustalone | 50 mm | 0,86 W/(m²K) | 0,038 W/(mK) | 0,820 |
| Boczna stała | 50 mm | 0,87 W/(m²K) | 0,038 W/(mK) | 0,820 |
