组件数据

English Deutsch 简体中文


结构系统
smartshell timberframe G

组件id: 0837cs03
制造商: pro Passivhausfenster GmbH
种类: 结构 
结构种类: 灯 (木头) 
窗户: The certification was done with the window smart-win solar i, which is a very slim phA-class window with triple 18 mm argon glazing, Swisspacer Ulti-mate spacer bar with PU secondary seal. A special feature of smatwin solar i is, that the reveal be-comes part of the windows frame. In No. 01, the window is installed at the outer wood-fibre board. In No. 02, it is installed deeper in the wall, see certification report. 
气密度: The airtightness layer in the walls and roofs a gypsum fibre board. The boards are sealed together and to the windows with an air-tightness tape. The board must be of sufficient air-tightness and the tape has to seal the junctions durable. 
图示: The Passive House Institute has defined international component criteria for seven climate zones based on hygiene-, comfort- and affordability criteria. In principle, components which have been certified for climate zones with higher requirements may also be used in climates with less stringent requirements. This use might make sense in certain circunstances. 
气候区:
备注: The construction system is built on a concrete floor slab supported by foam glass gravel. In addition, the inner side is insulated by 100 mm EPS. The timber frame walls are constructed with studs at 62,5 cm centres with gypsum fibre board fixed on the inside and plastered wood fibre board to the outside. The inside service cavity is insulated by wood fibre fleece. A gypsum board is mounted on the room side. The upper floors are formed with solif wood. The roof construction is formed with rafters at 80 cm spacings with cellulose insula-tion between. A gypsum fibre board works as air-tightness layer between the rafters ans the cross battens with gypsum board over.

回到清单 组件系统的

合法通知 | 拒绝 | 隐私设定