BA5/6 PH, Glasdach
| Certified since | 2013年7月18日 |
| 气候区 | 冷,温度 |
| 类型 | 玻璃顶 |
| 能效阶级 | phA |
| 材料 | 铝 |
| UW | 0.82 W/(m2K) |
| 打开种类 |
描述
Aluminium construction with covering- and pressure-strip from aluminium. PE-foam and styrodur insulator in the glazing rebate. Screws themallly seperated by ABS. Losses by screws and glass carrier were determined by 3D-thermal flux analysis (PHI). Used Pane: 52 mm (6/16/6/16/8), intersection of the Glass: 16 mm. Used spacer: Swisspacer V. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.
| 名称 | 边宽高度 | U值 | Ψ-Value | Frsi-Value |
|---|---|---|---|---|
| 立柱固定 | 60 mm | 0.98 W/(m²K) | 0.040 W/(mK) | 0.810 |
| 横梁固定 | 60 mm | 0.99 W/(m²K) | 0.040 W/(mK) | 0.810 |
| 下横框固定 | 60 mm | 0.99 W/(m²K) | 0.039 W/(mK) | 0.810 |
| 上横框固定 | 60 mm | 0.99 W/(m²K) | 0.039 W/(mK) | 0.810 |
| 侧柱 | 60 mm | 0.98 W/(m²K) | 0.040 W/(mK) | 0.810 |
