Component Database

English Deutsch


Construction system
Thermo System Passiv

Component id: 1235cs03
Manufacturer: Holzmann GmbH & Co. KG
Category: Construction 
Construction type: Single Leaf 
Window: The PHI example window spruce/fir-integral frame (0.11 W/(mK)) with 48 mm glazing and phA-class spacer was taken into account. The threshold is from fibre glass and timber, no aluminum is used. The window represents a very good standard and leads to low thermal bridges and high inner surface temperatures. No. 1 is a combination without shading, No. 2 with shutter and Nr. 3 with roller blind. 
Airtightness: At the floor slab, a liquid seal on concrete repre-sents the airtight layer. In the wall construction with interior plaster, this is the airtight level of the wall. The connection to the floor slab is done by plastering. The sealing of the windows takes place with suitable adhesive tapes. 
Illustration: The Passive House Institute has defined international component criteria for seven climate zones based on hygiene-, comfort- and affordability criteria. In principle, components which have been certified for climate zones with higher requirements may also be used in climates with less stringent requirements. This use might make sense in certain circumstances. 
Climate zones:
Remark: The floor slab consists of a 16 cm thick XPS insulation, 0.038 W / (mK) to ground and 20 cm to the side as flank insulation as a lost formwork. The thickness of the floor plate is 25 cm, followed by a 4 cm sound insulation, 4 cm screed and 1 cm flooring. Th wall is from aerated concrete, 48 cm, 0.08 W / (mK) and 4 cm insulating plaster 0.08 W / (mK). A concrete flat roof (20 cm), insulated by XPS (25 cm, 0.035 W/(mK)) is taken into account.

Back to list of construction systems

Legal notice | Disclaimer | Privacy Policy