Newly certified Manufacturers Certification criteria

No element found

0Products in the comparision list
Compare all

FWS 35 PD.SI

Certified since 30 декабря 2014 г.
Climate zone Прохладный, умеренный
Тип Curtain Wall System
Sub Type
Efficiency Class phA
Material Aluminium
UW 0,80 W/(m2K)
Open type

Описание

Aluminum curtain wall, insulated by PE-foam (0,038 W/(m²K). Reduction of the radiation losses by low emmissivity aluminum tape (e = 5 %). Losses by screws and glass carrier were determined by 3d-thermal flux analysis (PHI). Pane thickness: 50 mm (6/18/4/18/4), rebate depth: 12 mm, spacer: SWISSPACER Ultimate. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.

Имя Frame width U-Value Ψ-Value Frsi-Value
Mullion Fixed 35 mm 0,96 W/(m²K) 0,032 W/(mK) 0,820
Transom fixed 35 mm 0,96 W/(m²K) 0,034 W/(mK) 0,820
Transom 1 casement 142 mm 1,20 W/(m²K) 0,028 W/(mK) 0,820
Bottom Fixed 35 mm 0,96 W/(m²K) 0,034 W/(mK) 0,820
Top fixed 35 mm 0,96 W/(m²K) 0,034 W/(mK) 0,820
Lateral fixed 35 mm 0,96 W/(m²K) 0,032 W/(mK) 0,820
0735cw03
PHPP 9
PHPP 10
English
Deutsch
Karolinenstraße 1-15
33609 Bielefeld
Germany

U-Value Calculation

Please select preferred window layout