| Component id: | 0735cw03 |
|---|---|
| Manufacturer: | SCHÜCO International KG |
| Category: | Curtain Wall System |
| Material: | Aluminium |
| UW: | 0.80 W/(m2 K) |
| Efficiency class: | phA |
| Spacer: | SWISSPACER Ultimate |
| Climate zones: | Cool, temperate |
| Description: | Aluminum curtain wall, insulated by PE-foam (0,038 W/(m²K). Reduction of the radiation losses by low emmissivity aluminum tape (e = 5 %). Losses by screws and glass carrier were determined by 3d-thermal flux analysis (PHI). Pane thickness: 50 mm (6/18/4/18/4), rebate depth: 12 mm, spacer: SWISSPACER Ultimate. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing. |
| Frame cut | Frame width bf/mm |
Frame U value Uf/(W/(m2 K)) |
Glass edge Ψ-value Ψg/(W/(m K)) |
Temperature factor fRsi = 0,25 m2K/W |
|---|---|---|---|---|
| Mullion Fixed | 35 | 0.96 | 0.032 | 0.82 |
| Transom Fixed | 35 | 0.96 | 0.034 | 0.82 |
| Transom 1 casement | 142 | 1.20 | 0.028 | 0.82 |
| Bottom Fixed | 35 | 0.96 | 0.034 | 0.82 |
| Top Fixed | 35 | 0.96 | 0.034 | 0.82 |
| Lateral Fixed | 35 | 0.96 | 0.032 | 0.82 |
