Timber aluminium facade (Spruce/fir 0.11 W/(mK)), insulated by PE-foam (0.035 W/(mK)). Pane thickness: 48 mm (6/16/5/16/5), rebate depth: 18 mm. Losses by screws and glass carrier were determined by 3D-thermal flux analysis (PHI). Spacer: SWISSPACER Ultimate with butyl as secondary seal. The glazing was calculated with a 3 mm secondary seal. As it is often the case that this is thicker, today the calculation is carried out with a 6 mm secondary seal. This leads to a higher glazing edge thermal bridge, which can also be estimated by way of the spacer certificates: www.passivhauskomponenten.org / glazing edge bonds. The higher rates of heat loss can be compensated for by using e. g. improved glazing.
|立柱固定||60 mm||0.99 W/(m²K)||0.025 W/(mK)||0.770|
|横梁固定||60 mm||0.99 W/(m²K)||0.025 W/(mK)||0.770|
|横梁1||170 mm||0.88 W/(m²K)||0.018 W/(mK)||0.770|
|下横框固定||60 mm||0.99 W/(m²K)||0.025 W/(mK)||0.770|
|上横框固定||60 mm||0.99 W/(m²K)||0.025 W/(mK)||0.770|
|侧柱||60 mm||0.99 W/(m²K)||0.025 W/(mK)||0.770|